Our company provides a variety of Toyota loom shuttles, automatic shuttlecock nylon shuttles. Toyota textile shuttlecocks are composed of four-slot shuttle clamps, DS202 yarn feeders, dowel screws, non-removable shuttle tips, and injection shuttle bodies. The length is 405mm, the outer width of the bottom of the shuttle is 47mm, the height of the shuttle is 3.3cm, the width of the inner cavity is 34mm, and the width of the weft thread groove is 9.5mm. It is used with 205 or 200 textile reed tubes, and the weight of each handle is about 0.43KG. Toyota loom shuttles and automatic shuttle shuttles are mainly export-oriented, with MOQ of 3,000 or more.
There are four card slots on the front of the shuttle clip of the Toyota automatic shuttle shuttle. The openings of the two iron clips next to it are 2 cm. The top spring leaf is installed in the chute to resist the bottom of the weft bobbin. The shuttle chamber is placed horizontally.
The arrangement of the cypress weft tube of the Toyota loom on the disc is as shown above. When the cymbal tube below is not equipped with the weft yarn in the inner cavity of the shuttle, the empty cymbal tube is squeezed down and installed into the iron chuck of the nylon shuttle.
After the G263Z shuttlecock is used, the empty shuttlecock drops from the bottom of the shuttle (pictured above). At this time, the automatic shuttlecock is completed. The entire process of the Toyota loom can be completed without stopping.
The side of the shuttle has two holes (one oblong and the other is rectangular). The oblong hole is a weft detection slot, which is used to detect the empty weft yarn in the shuttle cavity during the weaving process. The left hole is a balanced weft hole.
The top plan view of the automatic nylon shuttle is shown above. The shuttle has three cross screws, all of which are GB slotted (different in length and length). The two screws for the shuttle clip are equipped with damping nuts (anti-loosening self-locking nuts).
The installation diagram of the yarn passing device is as above. After the weft slot is introduced, the direction can be changed to complete the shuttle loading.
Packaging: carton, 50 pcs / carton; color: dark red; manufacturing process: injection molding. The new Toyota loom (modified with dobby) is shown below:
If you need to buy nylon shuttle, Toyota loom, automatic shuttle change, please contact Xinda Textile Accessories Consulting!