1511M Automatic Loom Introduction
1. Purpose and scope of use
1511M loom is mainly used for weaving plain weave cotton and blended fabrics. If various twill or multi-arm draw-up devices are installed, weaving twill or more complex fabrics can be woven.
1. The shuttler can be changed automatically without stopping.
2. Divide left-handed car and right-handed car. (The left-handed car is the left-handed car)
3. The perforation width is 105 cm (the nominal reed width is 44 inches), 110 cm (the nominal reed width is 46 inches), 120 cm (the nominal reed width is 50 inches), and 125 cm (the nominal reed width is 52 inches).
4. The crank shaft (bent shaft) rotates at 180 ~ 220 rpm (105 ~ 110 cm loom), 170 ~ 210 rpm (120-125 cm loom).
5. Warp beams have the widest pitch of 1074mm (44 inch loom), 1125mm (46 inch loom), 1226mm (50 inch loom), 1277mm (52 inch loom).
6.Roll full roll diameter 222mm
7, the motor speed is 960 rpm.
8. Electric motor FO53-6, power 0.8 kW (most of weaving machine motor is 0.8KW)
9. Machine Dimensions: 2336mm (44 inch loom), 2387mm (46 inch loom), 2488mm (50 inch loom), 2539mm (52 inch loom); depth: 1428mm; height: 1295mm.
10. Machine weight is about 830KG (44 inch loom), 840KG (46 inch loom), 860KG (50 inch loom), 880KG (52 inch loom). (Tabular weaving machine excluding the motor).
11. Transmission mode Single motor triangle belt drive. A1700
12, let-off mechanism type semi-active semi-negative automatic let-off.
13. The warp stop device stops the warp-type mechanical stop.
14. Opening mechanism type Inner tread plate type upper roller hanging heald opening.
15, the shuttle mechanism type under the shuttle.
16. Beating mechanism type crank-link type.
17, warp protection device cruise type.
18. Take-up mechanism type seven-gear intermittent type.
19. Weft break self-stop device type weft cam control side weft fork.
20. Weft yarn replenishment device automatically changes shuttle type.
Excerpt from "1511 Automatic Loom Security Atlas"